Resources

Article · 6 November 2026 · 2 min read

7 signs your plant is paying for wasted power

Most plants overpay in the same few ways, and none shows up as “waste” on the bill. Seven signs to look for, and what each one means.

Illustration: seven-signs

Most plants overpay for electricity in the same few ways. None of them shows up as a line called “waste” on the bill. Here are seven signs to look for, and what each one usually means.

  1. Demand charges are high every month, even in slow months. Billed demand may be stuck at a share of an oversized contract demand.
  2. An excess-demand line appears now and then. One block crossed contract, usually from loads starting together.
  3. A power-factor penalty, or a kVAh bill well above kWh. Often a failed capacitor stage nobody noticed.
  4. Night and Sunday load never really drops. Compressors, chillers or lighting running with no production.
  5. Peak-hour units keep creeping up. A time-of-day plan that has quietly slipped.
  6. Units per tonne drift upwards. Leaks, worn equipment or poor loading, invisible without a daily number.
  7. Nobody can say which machine drove last month's bill. The most common sign of all, and the root of the other six.
Try this with last month's bill: find recorded maximum demand, average power factor and peak-zone units. If you cannot say what caused each one, you are probably paying for at least one of the signs above.

What to do next

Start with twelve months of bills. They show the pattern behind most of these signs in an afternoon. Then watch the few loads that matter every day, so problems are fixed in days, not discovered at the end of the month.

The cheapest unit of electricity is the one a plant stops wasting.

Ask Ardra about any line on your bill, or request a demo and an Ardra engineer will read it with you.

Keep reading

Want this read on your own bill?

Request a demo
Request a demo