7 signs your plant is paying for wasted power
Most plants overpay in the same few ways, and none shows up as “waste” on the bill. Seven signs to look for, and what each one means.
Resources
Plain guides on maximum demand, power factor, time-of-day tariffs and how to monitor a plant.
Most plants overpay in the same few ways, and none shows up as “waste” on the bill. Seven signs to look for, and what each one means.
Low power factor costs Indian plants money twice: as a penalty or extra kVAh units, and as higher kVA demand. Here is why it happens and how to stop paying for it.
Your demand charge is set by the single highest averaging window in the month. Here is how maximum demand is measured, how the charge is worked out, and how to keep it under contract demand.
Since April 2024, industrial consumers in India pay at least 1.2 times the normal rate in peak hours and at least 20% less in solar hours. Here is how ToD shows up on your bill and which loads are worth moving.
Ardra Genie answers questions about your plant from your own meters and bills, and shows the readings behind every answer.
A useful audit ranks fixes by rupee value and says how sure it is. A checklist for reading one, whoever writes it.
Most plants already have the data an energy monitoring system needs: in meters, SCADA, a BMS or spreadsheets. The simplest route for each.